How to mount a monitor without holes | Step-by-step guide

5 top basic tips on how to mount a monitor without holes

As a monitor user, one day you decide to free up desk space or create a new monitor/dual monitor setup and notice you need more space, but it’s frustrating that you cannot mount your monitor because you do not have VESA holes. How do you begin? Let’s get into the article!

What is VESA for?

VESA is a toolset of VESA standards for the manufacturing of flat-screen televisions and PC monitors. Most manufacturers comply with this VESA standard on the back of their displays by adhering to the industry-wide “hole pattern” for mounting purposes.

A VESA hole design is in both horizontal and vertical distance between mounting holes. VESA mount 75 x 75 means the TV mounting holes are 75 mm horizontally apart and 75 mm vertically apart.

Can all computer monitors have mounting holes?

Most new monitors use VESA mounts, while many old computers do not have the right port to connect the mounts. We suggest checking the back panel of your monitor properly because, in some models, these holes are hidden. You may use the manual guide to help indicate where the holes are found.

Remember that monitor varies and some may have added mounting requirements, be sure to check the manual guide.

What’s the difference between VESA and a Non-VESA monitor mount adapter?

The difference is the VESA mount adapter is less expensive, and easily seen in the markets than the Non-VESA Mount. It takes effort to assemble the VESA Mount adapter because there need to be holes drilled behind your monitor.

Non-VESA Mount adapter plates can be more expensive than the VESA adapter kit, and not easily found in the market. Though the good part, it takes little effort to mount on your monitor. It’s less adjustable and may not support a large-sized monitor.

While choosing one of these adapters to mount your monitor, either a VESA mount or a Non-VESA monitor, be sure what mount monitor you need.

How do I fix the VESA monitor mount adapter to my monitor?

To begin, arrange all necessary tools needed, which include:

  • VESA monitor mount stand
  • Screwdriver
  • Bolts and nuts
  • Sizeable hand drill machine
  • Marker
  • Screws (according to the monitor size and weight)
  • Epoxy resin (non-compulsory)
  • Piece of wood (non-compulsory)

1) Dismantle the monitor parts

Dismantle the monitor stand, bezel, and outer casing before connecting the VESA adapter plate.

Different models have different methods, best to check the user’s mount monitor manual to fix it correctly.

  • Begin by disconnecting all cables from the monitor, which include the power cord.
  • Carefully turn upside down the display and look for a hook; screw anti-clockwise to make sure all the screws are removed. Take off the base.
  • Remove the screw that holds the vertical stand.
  • Unscrew all fit adapter screws to remove the connector – however, some models may require you to remove the base plate.
  • After removing the monitor stand, pull off the bezel with a flat-head tool or your hands. Apply less pressure to enable the bezel not to break off.
  • Removing the bezel separates the monitor from the base cover plate. However, carefully place the bezel aside, and be sure the internal monitor connection does not get trampled.
  • If you will be drilling holes in wood, you may only take the standoff.

2) Create mounting holes in the cover plate

After dismantling the monitor parts, the next is to create a DIY VESA hole in the cover plate. To be sure to not drill in the wrong position, ensure to use a piece of wood.

Next, drill the holes in the right place, to enable the VESA adapter to match. Mark the areas you wish to drill all the holes before starting.

Follow these guidelines:

  • Take the VESA adapter at the top of the back cover, and press gently using your hands.
  • You’ll need to mark holes. Grab your marker to make holes.
  • Be sure that the marks are seen.
  • Use the drill machine to make holes in the marked areas.
  • The holes require to be equal to the size of the knots.

3) Mount VESA adapter kit

Mount the VESA adapter kit consists of:

  • Place a bolt into a hole, and have the VESA adapter put the fitted bolt in the close-by hole. Use a knot to do this.
  • Do the same for the next three holes; you may use wing nuts at the final set to make the connection tight.

Here’s how attaching the VESA adapter to your monitor can be different if you drilled holes in the wood

  • Take epoxy resin and apply it to the wood.
  • Connect the wood to the monitor’s back cover to enable all areas are in line with the marked portions. Take a few moments to wait till the wood is firm; this could be a few hours.
  • Above the holes, position the VESA adapter to make sure all areas are in line.
  • Knot all bolts in the four holes.

4) Assemble monitor parts

After you connect your VESA adapter to the monitor’s back cover, begin to assemble all parts. Because you’ll mount your monitor to the wall, you may reattach the stand.

Connect the monitor’s screen with the back cover. Gently position the bezel trim in the front. Make sure to connect the edges properly; in the process, you’ll hear sounds acknowledging the bezel, and back cover being connected accurately.

5) Mount the monitor to a mounting stand

To mount your monitor, use a mount VESA stand. The VESA adapter kit usually provides slides that can be used to slide into the mounting stand.

Attach the VESA adapter to your monitor; after drilled holes are achieved in the proper position, you can now plug in the VESA adapter to the monitor cover plate.

Because some VESA adapters have more screw holes, that will require the addition of four more bolts or screws to easily mount the monitor without obstruction.

By now using the VESA adapters, it’s easy to set up different displays.

How to mount Non-VESA monitors without holes

About how to mount a monitor without holes. Ensure the required material and tools are available:

  • Non-VESA monitor
  • Screwdriver
  • Hammer
  • Screws that match your monitor
  • Hacksaw
  • Drill

What to do:

  • First, search for any studs in your wall mount, it’s very vital because the mount needs to be screwed inside the studs. Studs are easily seen by gently hitting on the wall with a hammer.
  • After finding the studs, drill the holes. But, sometimes it is not the same because some mount is different. Always check the manual’s guide. Two holes are needed for each mount.
  • Make the mount stick on the wall after drilling the holes.
  • In the final step, hang the monitor on the mount.

Because of the type of mount you purchased, you may screw the monitor into the mount. After fixing the monitor, you can turn it on and change the settings.


Mounting monitors requires knowing which best fits the monitors. If your monitor is VESA compatible, you can perform a DIY with the VESA Monitor adapter kit and get your flat-screen television and PC monitors ready for use.

Be sure to read the user’s manual for any additional info required in setting up your monitor stand.

Non-VESA monitors stands are easy to set up.

Question & Answer

1) Do all computer monitors have mounting holes?

Yes, newer-model computer monitors have mounting holes. These modern monitors come with these holes at the back with a mounting plate, thereby making the monitors easy to mount.

However, older monitors that do not have these holes can still be set up using the Non-VESA monitor mounts.

2) Are all monitors VESA compatible?

Most monitors that are flat-panel monitors are designed to be VESA compatible monitor. To check if your monitor is VESA compliant, you may look at the back of your monitor and find the four-hole screw pattern.

3) Do HP monitors have mounting holes?

Yes, the HP monitor comes with mounting holes. These holes are compatible with the VESA mounts and can be attached to the wall, desk/table, etc.

4) Can you drill holes in the back of a monitor?

Yes, you can drill holes in the back of a monitor. But, with care and caution, else the monitor could be damaged. Using epoxy on the nuts on the inside of the monitor can help.

5) How do you mount a monitor that has no holes?

To mount a monitor without a hole, you may use VESA mounts, Velcro, magnets, adjustable clamps, adapter clips, and monitor brackets.

With any of these, you can safely mount your monitor with no holes.

6) How do you mount an LCD monitor without VESA?

To mount your LCD monitor without VESA, you will search for any studs on your wall. It’s crucial because the mount needs to be screwed inside the studs. Studs are easily seen by gently hitting on the wall with a hammer.

After finding the studs, drill the holes. But, sometimes is not the same because some mount is different. Always check the manual’s complete guide for kit info. Two holes are needed for each mount.

Make the mount stick on the wall after drilling the holes.

The final step, hang the LCD monitor on the mount. Read about Best Router For NAS In 2022

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *