How To Clean An IPS Monitor

How To Clean An IPS Monitor

If you’re searching for a nice monitor, an IPS monitor might be a great purchase because of the many benefits it provides over most other LCD panels and even certain LED panels. To get the most out of your gleaming new IPS panel, you’ll need to know how to clean a monitor screen properly.

Though maintenance may seem as simple as dampening a towel and wiping it down, it’s critical to remember the appropriate procedure and things to avoid in order to prevent damaging your monitor rather than removing the unpleasant dust, filth, and fingerprints. This post will teach you how to clean IPS monitor properly and what tools to use.

How To Clean An IPS Monitor

What Distinguishes An IPS Monitor From Other Displays?

Liquid crystals are used in IPS (in-plane switching) displays to provide vibrant colors.

  • These panels have a quicker reaction time than the majority of other panels.
  • For a better viewing experience, they have broader viewing angles.
  • They feature excellent colour and contrast, which is superior to most LCD panels on the market.
  • IPS panels provide exceptional colour accuracy and screen uniformity.

These factors demonstrate the advantages of owning a nice IPS monitor, but if you don’t know how to clean it, the numerous fingerprints and debris can ruin your viewing experience. As a result, it’s critical to understand what you’re doing while trying to clean your screen

Equipment Required To Clean

Microfiber cloth is typically the finest instrument to use for cleaning any electronic screen. This small piece of cloth is an essential tool for anyone who understands anything about cleaning electronics, and it can be obtained on the internet or in a variety of electronics stores.

Equipment Required To Clean

A glasses cleaning cloth is a typical home remedy for cleaning screens and displays, and while it is not harmful, nothing surpasses a microfiber cloth in terms of efficacy and safety. A little amount of distilled water or screen cleaning solutions can also assist.

Cleaning Your Screen Should Be Done In The Following Manner:

  • When cleaning the panel, use a gentle motion with the microfiber cloth, being careful not to push too hard, since this might harm the panel’s health.
  • If you can’t get rid of a stubborn coating of dust or grime with a simple swipe of the towel, utilize cleaning solutions designed for this purpose. There are screens dedicated to them, and they may be accessed online.
  • If you don’t have any screen cleaning chemicals on hand, dampening your microfiber cloth with a little water is the ideal answer. Although normal water may do the job, distilled water is preferred since common water may include minerals that will harm the screen.
  • When you’re finished, ensure your screen is completely dry before plugging it back in.

You’ll be an expert at cleaning IPS monitors in no time if you remember these instructions and apply cautious sweeping strokes from side to side or top to bottom.

Disinfect Vs. Sanitize

Disinfection is defined as the near-total eradication of germs from a surface or an area, according to official definitions from major health organizations such as the CDC and the WHO. Sanitization is the process of reducing germ populations to a safe level. That is, safe for people, but not so much for bacteria.

Disinfect Vs. Sanitizes

Realistically, you’ll only be able to clean your monitor at most, because the harsh chemicals and substances needed to aggressively kill off bacteria populations en masse would also ruin your screen, regardless of what material it’s made of.

If you use ethanol, rubbing alcohol, or bleach on your monitor, you’ll almost certainly leave lasting scars or, at the absolute least, destroy the rich glossy surface or lovely matte finish. You should also avoid using any type of window cleaning.

Regular soap, by most reports, isn’t any better and, because of the presence of lye, which is extremely corrosive, may also harm monitor surfaces. Caustic is difficult for monitors to handle.

Matte Vs Glossy Finishes – There’s a Difference When It Comes To Cleaning!

If your monitor is glossy and you know it’s made of glass, you might be able to get away with using ethanol or other forms of rubbing alcohol to disinfect it. This is due to the fact that glass, like metal, can withstand severe chemicals rather well. Glare-reduction coatings are applied to glass screens as well, and they will rub off and be destroyed if strong chemicals are used.

Matte Vs Glossy Finishes

Furthermore, because most PC displays have finely carved matte surfaces to reduce glare, LCD coatings are sensitive to anything from alcohol to common household cleaners. Keep them away from the matte monitors.

As previously said, employing them will very certainly permanently harm your screen.  Purchasing a new monitor each time the old one gets nasty isn’t the most cost-effective solution we can think of, and we make monitors, so take it from us: don’t do it.

The bottom line for this section is that typical cleaning products and the like may work on glossy displays, but verify with the manufacturer or the handbook first. Traditional cleaning solutions and products should never be used on matte surfaces since they can damage the display. Furthermore, many shops and stores provide LCD cleaning solutions that merely clean, that is, remove smudges and dust. They don’t sterilize or sterilize anything.

When It Comes To Cleaning Your Screen, There Are A Few Things You Should Avoid:

  • While your display is hooked in, do not clean it. Electricity and water do not mix well, and cleaning your monitor is no exception.
  • Make sure the solution you’re using doesn’t contain any alcohol or other corrosive ingredients, such as ammonia-based solutions since this might harm the panel.
  • If you wipe the screen using paper or cloth cloths, you risk leaving scratches and/or microfibers on the screen.
  • Finally, never spray water or cleaning solutions directly onto the screen, and use as little as possible.

Read More:


The above post explains how to clean your IPS display properly and provides cleaning recommendations, which may be a useful tool if your panel is prone to grime and fingerprints. All you need for this procedure is a decent microfiber cloth and a little water. It’s also crucial to remember the numerous things to avoid throughout the cleaning procedure in order to avoid damaging your display.


About Author

Hello, I am Zayn, a tech enthusiast, and have been writing on this topic for the past 10 years. I have had my hands on hundreds of tech gadgets over the years and know what it takes to make a quality product that stands out from the crowd. That’s why; I only focus on providing test results, reviews, and buying guides for technology devices. Thank you very much for taking the time to look at my bio; it really means a lot!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *